Drill Speed Controller

  • HOME
  • >
  • PRODUCT
  • >
  • Grouting Equipment
    Grouting Equipment

Double Line

 
  • SWDM-2000
  • Double-line liquid type high strength polyurethane injection
    taking a short time to harden
  • basic-feature.png
  • Mixture ratio : 1:1
    Feature : small, light weight Easy to work in the small place Plasmoptysis pressure : 350kg/
    weight : 12kg
    Power voltage : AC220V, 60Hz, 600W
    A 8 : 0.33
    B 8 : 0.33

  • SWDM-2100
  • Specification is same as SWM-1000
  • Mixture ratio : (A:10 , B:7.4) 2:1
    Feature : small, light weight Easy to work
    in the small place
    Plasmoptysis pressure : 350kg/
    Weight : 14kg
    Power voltage : AC220V, 60Hz, 600W

  • Injection

  • The valve shall be always located as shown in the picture at the top.
    Do not use it for any purposes other than two operations such as injection and cleaning
    (They are well described in the instruction manual.)

  • Cleaning

  • If you operate (test) the machine with the high pressure valve handle positioned like this, the pressure gauge is in
    a position of being completely turned momentarily, causing trouble.
    Therefore, never place the valve handle in the position as shown above.


  • Injection-img




 
205 Chungbuk Green Industry Promotion Agency, 1251 Garosu-ro, Heungdeok-gu, Cheongju-si, Chungbuk, Korea
Tel : (043)235-8104 , Fax : (043)235-8103

copyright(c)2014 MANSANG. all rights reserved.
     
Grouting Injection Pump | waterproofing products | Single line Injection Pump | Double line Injection Pump | Drill Speed Controller | Polyurethane Component | Acrylic Resin | water injection packer | Air Vent | Crack filler